Today we show you how to create an Angel foam rubber make with foam rubber and concrete.

Materials:
719000-29 foam rubber 2mm, 40×60 cm, bordeaux-1 Pck
852-00 foam rubber 2mm, 30×40 cm, white-1Pck
801-12 Styrofoam ball 120 mm-1
VD9405-00098 Knetbeton -1
9500-02 Dekobeton-1
8600-10 plywood board 41×56 cm -1
867-05 Beech Round Bars, 8mm x 1m-1
6136-51 ribbon lace 25 mm, bordeaux-1m
6145-27 Sweetie 6mm, old rose-1m
6145-33 Sweetie6 mm, gray brown-1m
6145-53 Band Experience 10mm, pink-1m
Tools: glue gun, iron, scissors, spatula, mold (plastic plate dm 22cm, height min. 2cm) for concrete, jigsaw, pencil, plastic cup, wing template, drill.
Pattern: Pattern for angels wings

Lay mold (plastic plate) with foil. Mix deco concrete according to instructions, pour into the mold and let it dry very well. Then drill a hole in the middle of the concrete slab, with the diameter of the rod (8mm). Cut the rod to 45cm and glue it into the concrete slab. Draw the wings into the plywood and cut out with the fretsaw. Spread the creamy kneaded concrete with the spatula on the styrofoam ball and the wings. Let dry. In the meantime, cut moss rubber, half a conical shape approx. 22 pieces with the dimensions H = 38cm, B = 10cm or half an ellipse shape approx. 24 pieces with the dimensions H = 41cm, B = 13cm. Stick the foam rubber parts around the wooden stick. Stick dried wings between the foam rubber to the wooden stick. Attach styrofoam ball as a head. Decorate with ribbons.